Baumatic BEI350SS User Manual

1 BEI350SS 35 cm Island cooker hood

10o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions.

11Setting the time of day o When the cooker hood lights have not been turned on and a motor speed has not been selected, you are able to set the ti

12automatically count down for the time previously set after 5 seconds. o IMPORTANT: The cut off timer function does not control the hood lights.

13The grease filters o Your cooker hood includes a grease filter which helps to absorb grease particles to protect your kitchen and furniture from

14 o Refit the grease filter once it has dried. o IMPORTANT: Let the grease filter dry thoroughly before refitting it in the cooker hood.

15 o Refit the grease filter. Fitting the carbon filter If the appliance is to be used in recirculation mode then it is necessary to fit c

16o Repeat this process for the second carbon filter. You need to place a carbon filter at either end of the motor. o Refit the grease filters. o

17with the I.E.E. and local regulations. The wires in the mains lead are coloured in accordance with the following UK code: Blue = Neutral, Brown =

18o Wall plugs are provided to secure the hood to most types of ceilings. However a qualified technician must verify the suitability of the material

19yourself sufficient space to make the electrical connections and connecting the ducting hose (if required). IMPORTANT: Your ceiling should have a

2User Manual for your Baumatic BEI350SS Cooker Hood 35 cm Island cooker hood in stainless steel NOTE: This User Instr

20Supplied installation components 1) Position the hanging plate on the ceiling and then mark the position of the screw holes. o The hanging pla

21 2) Fix the angle bars to the hanging plate, using the 8 x M4 nuts and bolts with metal washers. 3) Extend the angle bars to the required

22 o Fix the upper chimney section to the hanging plate, using the 4 x self tapping screws. o Slide the lower chimney section

23Completing the installation o If you are setting the appliance to recirculation mode, then you should now fit the carbon filter. See the “Fitting

24External ducting o Connect the spigot to the top of the cooker hood, and then connect a 125 mm ducting hose to the coupling (please note that the

25 My cooker hood has switched off during operation. o The safety cut-out device has been tripped. o Turn off the hob and then wait for the safe

26 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales

27

28

3Contents Page Environmental note 4 IMPORTANT SAFETY INFORMATION 5 – 7 Specifications of your cooker hood 8 Using your Baumat

4ENVIRONMENTAL NOTE Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug usel

5IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before a

6o The edges of the cooker hood are sharp – be mindful of this as you handle your appliance, especially during installation and cleaning. DO NOT CLE

7o Remember that when in extraction mode, your cooker hood is removing air from your room. Ensure that proper ventilation measures are being observ

8Specifications of your cooker hood Congratulations on purchasing a Baumatic cooker hood! PRODUCT DIMENSIONS Height: 880

9Using your Baumatic cooker hood Before first use IMPORTANT: THIS PROCESS MUST BE FOLLOWED BEFORE THE COOKER HOOD IS USED FOR THE FIRST TIME. o