Baumatic BHC900 User Manual Page 1

1 BHC900 90 cm touch control ceramic hob

10Control panel layout 1) Burner power control buttons 2) Timer plus and minus buttons 3) 2.20 kW dual zone activation button 4) 2.00 kW dual

11Touch controls o All operations are performed by means of the touch controls that can be found on the control panel. o Each touch control has

12Switching off the hob o Once you have switched off all of the cooking zones, you should turn off the hob. o Press the ON/OFF button (6). o I

13timer display and you are then able to adjust the power of any zone on the hob top. The hob timer Your hob has a timer which will countdo

14o The completion of the countdown time will be indicated by an audible sound and the hob will switch off completely. IMPORTANT: The countdown tim

15o If more than one zone is operating when one of the zones reaches its safety cut-off point, only the zone which has reached its safety cut off po

16o IMPORTANT: The ceramic hob surface is tough; however it is not unbreakable and can be damaged. Especially if pointed or hard objects are allowed

17scraper Fat splashes No Yes Ceramic hob cleaner Metallic discolouration No Yes Ceramic hob cleaner Water splashes or water rings No Yes Ceramic

18Installation The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK

191 Sealing strip Installing the appliance o Cut a hole in the worktop that corresponds with the drawing shown above.

2User Manual for your Baumatic BHC900 90 cm Front touch control 4 zone ceramic hob. NOTE: This User Instruction Manual contains

20o IMPORTANT: You must observe the ventilation requirements shown in the drawing above. o IMPORTANT: There are ventilation holes around the outs

21 o There are holes on the base or the sides of the hob that you can fix the four brackets to. There are three holes in each one of the brackets.

22Connecting the mains supply cable o The mains terminal block is located on the underside of the hob and the terminals are acce

23o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened. This shou

24My appliance isn’t working correctly o The cooking zones are not functioning or will not switch on. * It has been more than 2 minutes since the

25IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic

26 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900

27

28

3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 10 Dimensions 8 Specifications

4Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch

7Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be di

8o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also

9Electrical details Rated Voltage: 220 - 240 Vac 50 - 60 Hz Supply Connection: 32 A (double pole switched fused outlet with 3mm contact gap) Max