Baumatic BF18SS User Manual

1BF18SS 77cm touch control ceramic hob

Ceramic hob surface layout Control panel layout 10 1. ON/OFF button 2. Cooking zone selection button 3. Cooki

Cooking zone indicators and neon’s Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cle

Turning the hob on o Press the ON/OFF button (1) 12 o The cooking zone indicators (3) will all read “0”. o The decimal point symbols (13

Turning on the double hyperspeed zone The double hyperspeed zone has two cooking areas that you can use, a central section and an outer sectio

o Press the dual circuit ON/OFF button (6). o The dual circuit indicator neon (10) will go out and the outer section will switch off. Using the ov

Residual heat indicator o After a zone is switched off, the corresponding cooking zone indicator (3) will show the letter “H”. This means that the

LEVEL TIME LIMIT (hours) 1 – 2 6 3 – 4 5 5 4 6 – 9 1.5 o If the safety cut off has activated, the symbol “H” will appear in the cooking zone ind

17o The period of time that a zone will automatically pre-heat for before dropping to the actual power level, is shown in the table below:- LEVEL TI

18The hob timer (countdown mode) o Press the timer button (7) and a “00”will appear on the timer display (8). o A decimal point will appear on th

19Hob guidelines o The first few times the hob top is used, it may give off an acrid, burning smell. This smell will disappear completely with repe

User Manual for your Baumatic BF18SS 77 cm Front touch control 3 hyperspeed zone ceramic hob with grill zone. NOTE: This User Instr

Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains s

Using a ceramic hob scraper Your appliance will be provided with your appliance. The following guidelines should also be followed when using the cera

Installation The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Reg

Installing the appliance o Cut a hole in the worktop that corresponds with the drawings shown above. o IMPORTANT: You must have

(A) Clip (B) Fixing bracket (C) Screw o You should insert a clip (A) into the holes which are located in each corner of the hob. o Place

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

o The brass links must be positioned as marked in the appropriate diagram and once established ALL terminal screws must be tightened down

o The “green-yellow” earth wire must be connected to the terminal marked . It must be about 10 mm longer than the live and neutral wires. o The “b

o The cooking zones have become discoloured * This maybe caused by burnt on remnants of food. This will not affect the working of the appliance. Ho

29Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Baumatic appliance comes complete with a free 12 month guarantee covering both part

3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 9 Ceramic hob layout 10 Control pane

Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933

31

32

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard

Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before atte

6Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch

Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be disco

o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also t

9Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inpu