Baumatic BWD12.1 User Manual download pdf (Page 28)

IMPORTANT: Your appliance has an unbalance control system.

If this system detects that the washload is unevenly distributed

inside the drum. Your washing machine will try to redistribute

the load before spinning. If after several attempts it is unable

to redistribute the washload, then the appliance will either spin

at a slower speed or skip the spin cycle and drain.

Uneven load distribution can be caused by too large a wash

load or too small a wash load. It can also occur if a single item

if washed inside the appliance.

Poor wash results

My garments are looking grey and there are limescale

deposits present in the drum of my washing machine.

o There is not enough detergent being added.

o The incorrect detergent is being used.

o Stains are not being pre-treated.

o The correct wash program or wash temperature was not

selected.

I have followed the advice given above, but my

garments are still coming out with grey stains on them.

o The garments are soiled with oils, ointments or grease

and were washed without enough detergent.

o The wash temperature selected was too low.

o Fabric conditioner has come into contact with the

garments. If this happens try to wash out these stains

as quickly as you can and try to avoid getting

conditioner on the garments in future.

After the final rinse, I can still see foam.

o Modern detergents can result in there still being foam in the final

rinse, this does not mean that the washing is not being rinsed

properly.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Baumatic BWD12.1 User Manual Page 28