STD6.2SS-W 60 cm Standard hood
A = Motor ON / OFF switch. This switch turns the motor on and off and adjusts its speed. There are three speed sheets and pushing the switch to the r
11o If you are using the appliance in recirculation mode, then be sure to replace the carbon filters at the recommended interval (see section on “Fi
Maintenance Removing and cleaning the metal filter o First remove the metal filter by sliding the securing nibs at the sides of the grille on the u
Changing a light bulb 13 IMPORTANT: BEFORE ATTEMPTING TO CHANGE A LIGHT BULB, YOU MUST ENSURE THAT YOU HAVE DISCONNECTED THE COOKER HOOD FROM YOUR M
Fitting the carbon filter If the appliance is going to be used in recirculation mode then it is necessary to a fit carbon filter. This will help to
Installation IMPORTANT: Before installation read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rati
We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and l
o If possible, disconnect and move freestanding or slot-in cookers from their position, to provide easier access to the rear wall and ceiling. If thi
2) Drill these holes into the wall using a 6 mm diameter drill bit. If you intend to use your cooker hood as an extraction fan, you wil
6) Close the grease filter grille. IMPORTANT: If you are going to connect your cooker hood to external ducting, the vent hose can
User Manual for your Baumatic STD6.2SS-W 60 cm Standard Hood NOTE: This User Instruction Manual contains important information, including s
o The discharge outlet should have a cross section of at least 150 cm² (please note that the ducting hose is not supplied with the appliance but one
Extraction mode or recirculation mode? IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE INSTALLING YOUR COOKER HOOD WHETHER TO USE IT IN EXTRACTION MODE OR
Troubleshooting IMPORTANT: If your cooker hood appears not to be operating properly, before contacting the Customer Care Department, please refer to
My appliance isn’t working correctly IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your main
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sale
25
26
27
3Contents Page Environmental note 4 IMPORTANT SAFETY INFORMATION 5 – 7 Specifications of your cooker hood 8 Using your Baumat
ENVIRONMENTAL NOTE Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useles
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before att
o The edges of the cooker hood are sharp – be mindful of this as you handle your appliance, especially during installation and cleaning. DO NOT CLEAN
o Remember that when in extraction mode, your cooker hood is removing air from your room. Ensure that proper ventilation measures are being observed
Specifications of your cooker hood PRODUCT DIMENSIONS Height: 135 mm Width: 600 mm Depth: 500 mm APERTURE DIMENSIONS Width: 600 mm Depth: 370 mm
Using your Baumatic cooker hood Before first use IMPORTANT: THIS PROCESS MUST BE FOLLOWED BEFORE THE COOKER HOOD IS USED FOR THE FIRST TIME. STD6
Comments to this Manuals