Baumatic B25SE User Manual

s B25SE Side by side frost free fridge freezer

10Description of the product features (freezer) Safety glass shelves o The shelves may be placed in any of the guide slots within the interior of

11Using your Baumatic fridge freezer Before switching on o Remove all packaging materials before using the fridge freezer. This includes the foam

12Control panel The control panel is located outside the refrigerator, above the ice dispenser. It is used to control the fridge and freezer. Swit

13Manually setting the freezer temperature. o Press the ‘FRZ TEMP’ button once and the freezer icon will start to flash. Then press the ‘FRZ TEMP’ b

14Switching on rapid cooling mode This setting should be used if you want to chill something quickly, it will ensure that a powerful supply of cold

15Switching on energy saving mode This setting should be used if you wish to save energy when using your appliance. It will increase the temperature

16Using the ice/water dispenser Before first use You should not attempt to dispense ice for 6 hours after the appliance is first connected to your

17o When the dispenser is producing ice, you should remove the cup/glass from the dispenser chute when it is half full, otherwise you may get ice ov

18o If the ice is STILL discoloured after changing the water filter, then contact the Baumatic Customer Care Department. o If there is a power cut

19o Lift the ice maker up (1) and then pull the storage case (2) to remove it from the freezer. o To put the ice maker back into position, locate

2USER MANUAL FOR YOUR BAUMATIC B25SE 545 Litre side by side frost free fridge freezer NOTE: This User Instruction Manual contains importan

20Arranging and storing food in the fridge section o Warm food or evaporating liquids should not be stored in your refrigerator, as this will incre

21o Cheese and butter should be placed in airtight containers, or they can be wrapped in aluminium foil or polythene bags. As much air as possible s

22Freezing fresh food o To freeze the maximum quantity of fresh food specified above, you should set the freezer to fast freeze mode (see page 13),

23Storing commercially frozen food o The storage time and recommended temperature for storing commercially frozen foods are indicated on the packag

24Compressor noise o There will be an operating noise when the compressor is running. o After installation, the compressor may be noisier for a sh

25Cleaning and Maintenance: o Occasionally clean the condenser coils (if present) at the back of the appliance to maintain a high performance level

26Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do

27Fridge and freezer shelves o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove. Pull the shelf f

28Dispenser shelf o Take out the spillage grill and use a cloth to remove water from and clean this area. DO NOT USE ANY FORM OF ASOLINE

29o Use a solution of bicarbonate of soda and lukewarm water to clean the evaporating tray. o IMPORTANT: It is normal to get some ice droplets fo

3Contents Environmental note 4 Important safety information 5-6 Specifications of your fridge freezer 7-10 Description of the

30 o With dry hands, reconnect your appliance to your mains supply. You should activate fast freeze for a 24 hour period, before returning it to the

31o Your refrigerator comes supplied with a 13 amp plug fitted. If in future you need to change the fuse in this plug, then a 13 amp ASTA approved (

32o Your appliance should not be located in direct sunlight or exposed to continuous heat or extremes of temperature (e.g. next to a radiator or boi

33Removing the fridge and freezer doors WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO REMOV

34 o IMPORTANT: One person should support the door before attempting this next step. Lift up the front of the hinge and remove it from the applia

35Installing the decorative plinth o A decorative cover for the base of the appliance can be installed if you wish however it is not essential. The

36Connecting the water inlet hose and water filter 1) Connection the water inlet hose to the connector on the rear of the appl

37IMPORTANT- The running of water through the inlet hose and filter must be done, to make sure that any impurities from the manufacturing process are

38 My fridge freezer is noisy. o The refrigerant gas that circulates the pipe-work of the appliance may make a slight noise, even if the compresso

39IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic

4Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug usel

40Baumatic consumables o BC001 Degreaser for Dishwashers (200g) o BC002 Descaler for Washing Machines and Dishwashers (200g) o BC003 Ceramic H

41Technical Data Manufacturer BAUMATIC LTD Model Number B25SE Product Category 7 – Refrigerator-Freezer Energy Efficiency Class (1) A+ Annual Ene

42 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sale

43

44

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the app

7Specifications of your fridge freezer Dimensions of your appliance o Height: 1760 mm o Width: 902 mm o Depth: 750 mm (Including d

8IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your ap

9Description of product features (fridge) Safety glass shelves o The shelves may be placed in any of the guide slots within the interior of t