Baumatic BFWM1407W.1 User Manual

1 BFWM1407W.1 60 cm 7 kg Freestanding Washing Machine

10 9) Selection buttons. Use these buttons to scroll through the additional wash cycles options. LED display Wash cycle progress indicators. Th

11Temperature display. The LED’s will show what temperature has been set. Spin speed display. The LED’s will show what spin speed has been set.

12 Preparing the wash cycle Preparing your garments for washing o Your washing should be sorted out, according to the fabric type and the wash c

13 A selection of wash care symbols Washing Boiling temp 95°C Normal temp 60°C Normal temp 40°C Do not wash! Bleachable in cold water Do not b

14 Liquid detergent If you are using liquid detergent, then in the majority of cases the liquid should be placed inside the dosing device supplied

15 Wash program table * Energy test program Cotton 60°C/40°C. These programs are suitable for cleaning normally soiled cotton laundry and are the

16 Wash program guidance o A wash program option can only be selected if the program table advises that it is possible with the wash cycle you have

17o Turn off the water tap and turn the appliance off by using the on/off button (8). o Disconnect the appliance from the electricity supply. Pa

18Manual soaking 1) Load the laundry into the washing machine drum and put the detergent into the drawer according to the manufacturer’s instruction

19Extra rinse o The extra rinse option is mainly used for the clothes of people with sensitive skin. The laundry will undergo an additional rinse t

2USER MANUAL FOR YOUR BAUMATIC BFWM1407W.1 60 cm 7 kg Freestanding Washing Machine NOTE: This User Instruction Manual contains imp

20Child lock Your appliance has a child lock option. If this is set it will mean that nobody can affect the operation of the wash program once it ha

21Maintenance and cleaning In daily use o Once a wash cycle has completed, you should pull out the detergent drawer slightly, so it can dry out.

22o Detergent can also accumulate inside the detergent drawer recess, so you should also clean this out using warm soapy water and a soft cloth. o

23Always keep a cloth nearby to dry up any water spillage when removing the cover. Remove any objects from the pump impeller by rotating it. 3)

24o Clean the filter approximately every 6 months, when water leaks from the water inlet, or if there are frequent interruptions to your water suppl

25Garments that are covered in stains, grease or are heavily soiled may need to be pre-washed or soaked before being placed inside of the washing mac

26 Tomato paste Scrape the dried pieces without ruining the material, then leave in cold water for about 30 minutes and wash by rubbing with detergen

27Poor wash results My garments are looking grey and there are limescale deposits present in the drum of my washing machine. o There is not

28Installation IMPORTANT: THIS INSTALLATION MUST BE COMPLETED BY A SUITABLY QUALIFIED PERSON. BAUMATIC ONLY SANCTIONS THE INSTALLATION GIVEN IN THIS

29Locating your washing machine o Before commencing installation, check the location where you intend to install the appliance. You should make su

3Contents Environmental note 4 Important safety information 5 – 6 Specifications 7 Description of the appliance 8 - 11

30Connecting to the mains water supply IMPORTANT: The washing machine should never be connected to the water mains using an existing inlet hose, YOU

31Do not over bend the inlet hose or this will cause damage. Connecting to the water outlet 1) Please use an elbow to bend the

32 Levelling the appliance o Place the washing machine on a solid and level floor surface. DO NOT PLACE THE WASHING MACHINE ON A CARPET OR A SUSPE

33 The moulded plug that is supplied with the appliance must be placed into an earthed and insulated socket.  Broken or damaged power leads must

34If a fault code reappears after following the above advice and clearing the fault code. You should turn the washing machine off. Disconnect the app

35and empties at the same time. than the water level in the machine. o Check if the drainage pipe and sewage have been sealed. If they have been, t

36IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Custo

37 Technical Data Manufacturer BAUMATIC Model Number BFWM1407W.1Rated Capacity of Standard Cotton Program 7kgEnergy Efficiency Class A+ Annual En

38and the consumption of the low-power modes. The actual energy consumption will depend on how the appliance is used. 2) Water consumption is based

United Kingdom Baumatic 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Custom

4Environmental notes

44

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6o Before the first use of the appliance, we advise that a 95 degree cotton wash is completed. No garments should be placed inside the machine; howe

7Specifications o 12 wash programs o 7 kg wash load (BFWM1407W.1) o 1400 rpm maximum spin speed o LED display o Electronic control operation o

8Description of the appliance Accessories

9Control panel 1) Washing program selection dial. Use this dial to select the required washing program. 2) Start / pause button. Press this butt