Baumatic PCC9220BL User Manual

That 1PCC9220BL/SS 90cm Multi-function twin cavity cooking theatre

10Standard accessories: o Wok stand o Removable side racks o 2 x Safety shelves o Enamelled drip tray o Trivet o LPG conversion jets Optional

Control Panel Thermostat control knob (main oven) o Use this control knob to control the temperature in the oven. Oven function sel

Oven programmer/timer display 7) “Auto” function symbol 8) “Minute minder” symbol 9) “Manual operation” symbol. Setting and using the ove

13Setting the minute minder function (main and secondary oven) You are able to set the minute minder at any time, regardless of whether an oven func

14Setting the duration function (main oven only) This function will allow you to set a countdown time similar to the minute minder function. However

15Setting the end cook function (main oven only) This function is similar to the duration function, however instead of selecting a period of time th

16Setting the start and end time function (main oven only) This function will allow you to set a time in the future that the oven switches on at and

Selecting a cooking function and temperature Selecting manual operation mode After your appliance is connected to your mains supply for the first t

There are eight cooking functions available on your appliance: OVEN LIGHT: Separate light control which allows the light to be switched on, even when

19hermostat control knob (main oven) he oven thermostat control knob should be turned e n function and temperature (secondary oven) you turn the con

User Manual for your Baumatic PCC9220BL/SS 90 cm Multi-function twin cavity cooking theatre NOTE: This User Instruction M

20sing and assembling the rotisserie U o Place the food on the spit (L), making sure that it is placed will o Place one end of the s

21Coo ckaging for king temperatures and times. Once familiar with the performance of your appliance, temperatures and times can o aging for this pa

22o The grill heating element becomes extremely hot during the o Important: Be careful when opening the door, to avoid contact o IMPORTANT: In

23nergy saving tips o spond to that o nd beyond the diametre of the o Use flat bottomed pans only o When possible, keep a lid on the pan whils

24o Never clean the oven surfaces by steam cleaning. o The oven cavity should only be cleaned with warm soapy water, o Any stains that may appea

25eplacing the oven bulb MPORTANT: The oven must be disconnected from o Remove all oven shelves o Unscrew the lamp cover. o Unscrew the bulb and

26o IMPORTANT: You should make sure that the door is supported o The oven door and door glass should only be cleaned using a o Replace the oven

o Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure. o When refitting, make sure that the g

Positioning The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above the ambie

o Any overhanging surface or cooker hood should be at least 700 mm above the highest point on the hob top (including the burners). o Baumatic do no

3Contents Environmental note 4 Important safety information 5 – 9 Specifications 9 – 10 Thermostat control knob (main oven)

Gas connection This appliance must be installed by a competent person in accordance with the current versions of the following UK (United Kingdom) or

31o Ensure that the room containing the cooker is well ventilated, keep natural ventilation holes or install a mechanical ventilation device (mechan

Gas connection ALL INSTALLATION AND SERVICE WORK MUST BE CARRIED OUT BY A CORGI REGISTERED ENGINEER. 32 o Prior to installation, ensure that the g

Gas adjustment (Conversion to LPG) All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the cooker from the elect

o Reassemble all the burners carefully; in particular you should make sure that the flame spreader is correctly placed on the burner. IMPORTANT: Aft

Fitting a stability chain IMPORTANT: It is a legal requirement for your CORGI registered installer to fit a stability chain. The stability hook

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

o The cable can be looped if necessary, but make sure that is not kinked or trapped when the cooker is in position. Replacing the mains supply cable

38My appliance isn’t working correctly o The oven isn’t coming on. * Check that the oven is in manual operation mode. * Check that you have sel

o The oven light is not working * Refer to page 25 and follow the “Replacing the oven bulb” section. o I am getting condensation in my oven * S

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard

40 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900

41

42

43

44

Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before atte

6Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this co

7o Do not place heavy objects on the oven door or lean on the oven door when it is open, as this can cause damage to the oven door hinges. Nobody sh

o Do not attempt to lift or move cooking appliances by using the oven door or handle, as this may cause damage to the appliance or result in injury t

o The above directives comply with 93/68/EEC regarding CE marking. o The manufacturer declares that the oven is built using certified materials and